Originally bred in Israel, the Super CBD industrial hemp cultivar is an adaptable plant. With its high CBD content and rich terpenes profile, our Super CBD hemp clones are in high demand. Super CBD can reach over 12ft in one season, making it a diverse selection. With proper staking, Super CBD can produce 3lbs per plant.
Super CBD is a preferred selection for late plantings and makes an excellent fiber crop. Because of its aggressive growth habit, Super CBD can be planted late in the season and still produce high yields. Super CBD is also an excellent selection for non-irrigated fields and regions with a short growing season.
Super CBD Is a late bloomer and is typically harvested in October, once the colas show a purple hue.
Helpful Tips
The long internodes of Super CBD make scouting easy
The colas of this variety are our most worm-resistant
Industrial Hemp has different nutritional needs in different stages of the plant's development. Since you are buying rooted clones, there are only two periods of the plant's life-cycle that pertain to your grow.
Vegetative:
The vegetative stage occurs after the clones have finished rooting and lasts all the way to the flowering stage. During the veg stage, industrial hemp plants are storing up nutrients through absorption in the root system and photosynthesis in their leaves. This store of energy is required for the latter production of flowers. A plant that is unhealthy during its vegetative stage will not produce a maximum yield of CBD later in the mature cola. During the veg stage, hemp plants are especially hungry for nitrogen. They use this nutrient to build new stems at internodes, produce new leaves, and ultimately get ready to produce CBD in their flowers. For this reason, we use a higher nitrogen rate during the vegetative stage. Our preferred rate is an NPK ratio 3:1:2. For field-grown hemp we use 200 lbs of nitrogen per acre. For indoor-grown hemp we use 150 ppm nitrogen on a constant-feed program. Your soil will vary, so make sure to test your hemp crop for your local environment.
Flowering:
In high CBD production, the flower is where the money is. The flowering stage is the final phase in the natural reproductive cycle of the plant. Industrial hemp is a photoperiodic plant, which means it will begin the flowering stage as soon as the duration of sunlight declines. Each hemp variety has a small variance to light sensitivity, but a general rule of thumb is that industrial hemp plants begin the flowering stage when day length is less than 12 hours of sunlight. When we see flowering starting to develop, we usually run clear water (with no fertilizer) for about two weeks before we start a high phosphorus and potassium feeding program. We use an NPK ratio of 1:3:4 during the flowering stage and then cut back to clear water again about 2 weeks before harvest. For field-grown hemp we use 160 lbs of nitrogen per acre. For indoor-grown hemp we use 100 ppm nitrogen on a constant-feed program.
Planting Instructions For Super CBD Hemp Clones
Our Super CBD hemp clones will come ready to plant directly in the field. We plant our fields at 4-6 feet on center with 6-8 feet between rows. This ensures proper plant development and maximum CBD yield. Industrial hemp likes a soil with a pH between 6.0-7.0, which is well-drained, and will have 10-14 inches of rainfall (or irrigation) during the growing season.
We do not plant before the last frost date in our area due to the possibility of losing hemp clones to bad weather. There is no reason to rush the planting of the crop as tall plants are harder to harvest and do not increase the maximum CBD yield of the crop.
We have seen success in using raised beds in more clay-type soils to increase drainage and stave off any water sitting on the roots of the plant. Plastic coverings on these rows can help with weed control, but they make it harder to determine the soil moisture level. Drip Tape can be added as the raised beds are being made to help with controlled irrigation and fertilization requirements.
Current Availability
09-28-2020 (Week 40)
0
10-05-2020 (Week 41)
0
10-12-2020 (Week 42)
420
10-19-2020 (Week 43)
420
10-26-2020 (Week 44)
420
11-02-2020 (Week 45)
420
11-09-2020 (Week 46)
4,690
11-16-2020 (Week 47)
4,690
11-23-2020 (Week 48)
4,690
11-30-2020 (Week 49)
4,690
12-07-2020 (Week 50)
4,690
12-14-2020 (Week 51)
4,690
12-21-2020 (Week 52)
4,690
12-28-2020 (Week 53)
4,690
01-04-2021 (Week 01)
4,690
01-11-2021 (Week 02)
4,690
01-18-2021 (Week 03)
4,690
01-25-2021 (Week 04)
4,690
02-01-2021 (Week 05)
4,690
02-08-2021 (Week 06)
4,690
02-15-2021 (Week 07)
4,690
02-22-2021 (Week 08)
4,690
03-01-2021 (Week 09)
4,690
03-08-2021 (Week 10)
4,690
03-15-2021 (Week 11)
4,690
03-22-2021 (Week 12)
4,690
03-29-2021 (Week 13)
4,690
04-05-2021 (Week 14)
4,690
04-12-2021 (Week 15)
4,690
04-19-2021 (Week 16)
4,690
04-26-2021 (Week 17)
4,690
05-03-2021 (Week 18)
4,690
05-10-2021 (Week 19)
4,690
05-17-2021 (Week 20)
4,690
05-24-2021 (Week 21)
4,690
05-31-2021 (Week 22)
0
06-07-2021 (Week 23)
0
06-14-2021 (Week 24)
0
06-21-2021 (Week 25)
0
Super CBD Quick Reference Guide
Max CBD
10 - 12%
CBD:THC Ratio
31 : 1
Max CBD (Delta 9 State)
12 - 16%
Target Planting
June - August
Target Harvest
October - November
Spacing
5-7' centers
Originally bred in Israel, the Super CBD industrial hemp cultivar is an adaptable plant. With its high CBD content and rich terpenes profile, our Super CBD hemp clones are in high demand. Super CBD can reach over 12ft in one season, making it a diverse selection. With proper staking, Super CBD can produce 3lbs per plant.
Super CBD is a preferred selection for late plantings and makes an excellent fiber crop. Because of its aggressive growth habit, Super CBD can be planted late in the season and still produce high yields. Super CBD is also an excellent selection for non-irrigated fields and regions with a short growing season.
Super CBD Is a late bloomer and is typically harvested in October, once the colas show a purple hue.
Helpful Tips
The long internodes of Super CBD make scouting easy
The colas of this variety are our most worm-resistant
Industrial Hemp has different nutritional needs in different stages of the plant's development. Since you are buying rooted clones, there are only two periods of the plant's life-cycle that pertain to your grow.
Vegetative:
The vegetative stage occurs after the clones have finished rooting and lasts all the way to the flowering stage. During the veg stage, industrial hemp plants are storing up nutrients through absorption in the root system and photosynthesis in their leaves. This store of energy is required for the latter production of flowers. A plant that is unhealthy during its vegetative stage will not produce a maximum yield of CBD later in the mature cola. During the veg stage, hemp plants are especially hungry for nitrogen. They use this nutrient to build new stems at internodes, produce new leaves, and ultimately get ready to produce CBD in their flowers. For this reason, we use a higher nitrogen rate during the vegetative stage. Our preferred rate is an NPK ratio 3:1:2. For field-grown hemp we use 200 lbs of nitrogen per acre. For indoor-grown hemp we use 150 ppm nitrogen on a constant-feed program. Your soil will vary, so make sure to test your hemp crop for your local environment.
Flowering:
In high CBD production, the flower is where the money is. The flowering stage is the final phase in the natural reproductive cycle of the plant. Industrial hemp is a photoperiodic plant, which means it will begin the flowering stage as soon as the duration of sunlight declines. Each hemp variety has a small variance to light sensitivity, but a general rule of thumb is that industrial hemp plants begin the flowering stage when day length is less than 12 hours of sunlight. When we see flowering starting to develop, we usually run clear water (with no fertilizer) for about two weeks before we start a high phosphorus and potassium feeding program. We use an NPK ratio of 1:3:4 during the flowering stage and then cut back to clear water again about 2 weeks before harvest. For field-grown hemp we use 160 lbs of nitrogen per acre. For indoor-grown hemp we use 100 ppm nitrogen on a constant-feed program.
Planting Instructions For Super CBD Hemp Clones
Our Super CBD hemp clones will come ready to plant directly in the field. We plant our fields at 4-6 feet on center with 6-8 feet between rows. This ensures proper plant development and maximum CBD yield. Industrial hemp likes a soil with a pH between 6.0-7.0, which is well-drained, and will have 10-14 inches of rainfall (or irrigation) during the growing season.
We do not plant before the last frost date in our area due to the possibility of losing hemp clones to bad weather. There is no reason to rush the planting of the crop as tall plants are harder to harvest and do not increase the maximum CBD yield of the crop.
We have seen success in using raised beds in more clay-type soils to increase drainage and stave off any water sitting on the roots of the plant. Plastic coverings on these rows can help with weed control, but they make it harder to determine the soil moisture level. Drip Tape can be added as the raised beds are being made to help with controlled irrigation and fertilization requirements.
